Fast, Reliable Heating & Furnace Across Mentone
Heating and furnace service in Mentone runs $150–$700 for repairs and $3,500–$7,500 for full replacement, with most tune-ups falling between $80–$200. Our Heating & Furnace team dispatches from San Jose to Mentone regularly, and we know the canyon roads well enough to bring the right equipment in one trip. Call (844) 560-6978 for a free estimate.
Mentone’s not a quick off-ramp job for us. We’ve been driving the mountain routes to 92359 for years, and we’ve learned that Mentone homes punish HVAC systems differently than the valley floor. The elevation, the cold-air drainage, the older housing stock — these aren’t footnotes. They’re the main story of why your furnace acts the way it does.
Why Crestview Heating & Air California Is Mentone’s Preferred Heating & Furnace Company
Our 4.8-star average across 250+ reviews includes plenty of Mentone homeowners who found us after another contractor sized their system wrong. Owner Marcus Feldman still manages jobs in the field as Service Manager, so when we say we’ll check your ductwork before quoting a furnace, he’s the one making sure it happens.
Nearly two decades of HVAC experience means we’ve seen virtually every furnace brand and age running in Mentone’s microclimate. From propane-fired Lennox units in canyon-view homes to aging Rheem systems in post-war bungalows along Mentone Boulevard, your system is our specialty. We don’t outsource to anonymous technicians, and we don’t guess at sizing.
Our response time to Mentone accounts for the mountain roads and the fact that many properties sit on longer drives off main arteries. We stock parts for Trane, Lennox, Goodman, Rheem, and the other major brands we service, because a second trip to Mentone costs you another cold night.
Our Heating & Furnace Services in Mentone
Furnace Repair in Mentone
A furnace repair in Mentone typically costs $150–$700 depending on the part and accessibility. We see a lot of ignitor failures and gas valve issues in Mentone’s older systems, especially after cold snaps when units cycle hard. The canyon drainage means your furnace works harder than a Redlands equivalent, and components wear faster. We diagnose on-site and carry common parts for Trane, Lennox, Goodman, and Rheem systems to complete most repairs same-day.

Furnace Replacement in Mentone
Full furnace replacement in Mentone runs $3,500–$7,500 including equipment, labor, and basic duct modifications. This is where local knowledge becomes critical. Mentone sits at 1,700–2,000 ft elevation at the mouth of Mill Creek Canyon, where cold air drains off the San Bernardino Mountains at night, causing winter lows to drop below freezing while the valley floor stays above 40°F — a microclimate that demands heating systems sized for real winter loads, not just Redlands-style mild winters. We calculate Manual J loads using Mentone-specific design temperatures, not valley defaults. Undersizing here means weeks of auxiliary heat, spiked propane bills, and premature compressor failure.
In the Mill Creek Canyon drainage, we serviced a 1950s ranch-style home on Mentone Boulevard whose aging furnace struggled to keep up on 28°F nights. We replaced it with a 96% AFUE Carrier gas furnace rated for low ambient operation, after first sealing ductwork with Aeroseal — a fix that addressed chronic undersizing from using Redlands design temps. The homeowner noted their auxiliary heat had run almost nonstop the previous winter; our one-trip solution eliminated that.

Furnace Tune-Up in Mentone
A furnace tune-up in Mentone costs $80–$200 and should happen annually before the cold season. Our tune-ups include combustion analysis, heat exchanger inspection, gas pressure verification, and filter sizing for your specific system. Given Mentone’s wide temperature swing — triple-digit summers to sub-freezing winters — your furnace sits idle for months then works overtime. That cycling pattern stresses heat exchangers and ignition components. We catch cracks, corrosion, and airflow restrictions before they become mid-winter emergencies.

Heat Exchanger Inspection & Replacement in Mentone
Heat exchanger failure is a safety issue we take seriously, especially in Mentone’s older housing stock. Mid-century rural homes often have furnaces that have cycled through decades of mountain cold snaps. A cracked heat exchanger can leak carbon monoxide into living spaces. We inspect with visual scopes and combustion analyzers, and we replace with OEM-spec exchangers matched to your unit’s age and model. Given the duct leakage common in Mentone’s uninsulated post-war homes, we also verify that airflow restrictions aren’t overworking the exchanger.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mentone
Your system, our specialty — we service nine major HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Mentone customers, this means no one gets turned away because “we don’t work on that.” We stock common parts for Trane, Lennox, Goodman, and Rheem locally, and our factory training covers diagnostic protocols specific to each manufacturer’s ignition systems, board logic, and warranty requirements. Fast turnaround matters more in Mentone, where a second service call means another night with space heaters.
Common Heating & Furnace Problems We See in Mentone Homes
- Furnaces undersized using valley design temperatures. Technicians working from Redlands or Highland specs chronically underestimate Mentone’s heating load. The result: a system that runs in emergency auxiliary heat for weeks every winter, burning through propane or electricity while never quite reaching setpoint.
- Propane systems with inadequate low-ambient heat pump performance. Mentone’s elevation means propane is more common than in denser valley areas. Heat pump defrost cycles fail or backup heat kicks in too often on cold nights when the unit wasn’t spec’d for true mountain conditions.
- Duct leakage and poor envelope insulation in mid-century rural homes. Many Mentone structures were built to minimal insulation standards and never retrofitted. Newly installed furnaces short-cycle or fail to reach setpoint in freezing weather because the heat escapes faster than the duct system can deliver it.
- Ignitor and gas valve failures after hard cold snaps. When Mentone dips into the upper 20s, furnaces that have been barely used all summer fire up under maximum load. Components stressed by age and thermal cycling fail precisely when demand peaks.
Pricing for Heating & Furnace in Mentone, CA
| Service | Price Range in Mentone |
|---|---|
| Furnace Repair | $150–$700 |
| Furnace Replacement | $3,500–$7,500 |
| Furnace Tune-Up | $80–$200 |
These ranges reflect Mentone’s market, where longer drives, propane system complexity, and the need for proper Manual J sizing can push replacement costs toward the higher end compared to flat valley jobs. What affects your specific quote: furnace age and brand accessibility, duct condition (we inspect before quoting replacement), whether the system is natural gas or propane, and any code upgrades needed for venting or combustion air. We provide upfront pricing after diagnosis, not vague estimates that balloon. Free estimates for replacement jobs. Call (844) 560-6978 to schedule.
We Also Serve Cities Near Mentone
Our service radius includes Redlands, Yucaipa, Highland, and Calimesa — though we size systems differently for each. Redlands and Highland sit low enough to use milder design temperatures. Yucaipa shares some elevation with Mentone but lacks the direct canyon drainage. Calimesa’s newer stock faces different challenges. We adjust our load calculations and equipment specs for each microclimate, not one-size-fits-all valley defaults.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Mentone
Yes. Mentone’s 1,700–2,000 ft elevation and canyon-mouth location create heating loads 20–30% higher than valley-floor calculations. A furnace sized using Redlands or Highland design temperatures will run continuously in auxiliary heat during cold snaps. We use Mentone-specific Manual J inputs that account for the Mill Creek cold-air drainage. Call (844) 560-6978 for a proper load calculation — estimates are free.
Because it was likely spec’d for valley temperatures, not Mentone’s sub-freezing nights. Heat pump capacity drops as outdoor temperature falls, and defrost cycles become more frequent. In Mentone, low-ambient performance specs and proper supplemental heat sizing matter more than 10 miles west. We evaluate whether your heat pump is rated for the loads it actually faces, or whether a dual-fuel or properly sized gas furnace makes more sense. Call (844) 560-6978 for an assessment.
Almost always. Mentone’s mid-century rural housing was built to minimal insulation standards, and duct leakage in unconditioned crawl spaces or attics wastes 20–40% of heated air. Installing a new furnace without addressing the envelope is like pouring water into a cracked bucket. We test duct tightness and offer Aeroseal when appropriate — it’s often the difference between a system that reaches setpoint and one that runs all night. Call (844) 560-6978 to schedule duct testing with your estimate.
We service all nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We carry common parts for Trane, Lennox, Goodman, and Rheem on our trucks, and our factory training covers diagnostic and repair protocols for each. No Mentone homeowner gets told “we don’t work on that.” Call (844) 560-6978 — we’ll confirm parts availability for your specific model.
Annually, ideally in early fall before the first cold snap. Mentone’s wide temperature swing — idle all summer, then heavy winter use — stresses heat exchangers and ignition components more than moderate climates. Our tune-up includes combustion analysis, heat exchanger inspection, and gas pressure verification. Catching a cracked exchanger or failing ignitor in October beats discovering it on a 28°F night in January. Call (844) 560-6978 to schedule.
Written by Marcus Feldman, Owner and Service Manager at Crestview Heating & Air California, serving Mentone and the San Bernardino mountain communities since 2005.