Fast, Reliable AC Repair & Installation Across Burbank
AC repair in Burbank typically costs $150–$650, while a full AC installation runs $3,500–$7,500. Most repairs are completed same-day, and our AC Repair & Installation team keeps common capacitors and contactors stocked for Burbank’s nine major brands.
We’re Crestview Heating & Air California, and we’ve been handling HVAC calls in the San Fernando Valley long enough to know that Burbank isn’t coastal LA. The 100°F+ afternoons that bake neighborhoods from Magnolia Park to the Rancho area aren’t exceptions anymore, they’re July and August. When your compressor seizes on a Saturday evening or your 20-year-old Carrier starts blowing warm air during a Santa Ana surge, you need a technician who understands how Burbank’s geography punishes equipment differently than Hollywood or the westside. Call us at (844) 560-6978. We answer.
Why Crestview Heating & Air California Is Burbank’s Preferred AC Repair & Installation Company
Burbank’s municipal utility structure alone weeds out contractors who treat the valley as one uniform market. Burbank Water and Power handles every HVAC permit, inspection, and rebate through its own portal and approval queue, separate from LADWP or SCE. Contractors based outside the city routinely file paperwork through the wrong channels, leaving homeowners’ rebates stranded and triggering second inspection cycles that delay final signoff by weeks. We don’t make that mistake because we don’t treat Burbank as an afterthought.
Our 4.8-star average across 250+ reviews reflects jobs we’ve actually completed, not a curated handful of testimonials. Nearly two decades of HVAC experience means Marcus Feldman, our owner and active Service Manager, has personally diagnosed systems in 1940s ranch homes with original floor registers, production facilities on the studio lots, and everything between. Your system, our specialty. Owner-managed, not outsourced.
We stock capacitors, contactors, and refrigerant for Trane, Lennox, Goodman, and Rheem units commonly found in Burbank’s housing stock. That inventory sitting on our truck is what turns a “we’ll order the part” delay into a same-day fix.
Our AC Repair & Installation Services in Burbank
AC Repair
Burbank’s summer heat cycles are brutal on capacitors and compressors. We recently serviced a 1955 California bungalow on Harvard Road near Magnolia Park. The original undersized ductwork, designed when the valley was milder, was choking the 2014 3-ton Lennox that the homeowner had installed without a Manual J calculation. Despite 100°F+ Burbank summer afternoons, the unit ran nonstop without cooling the back bedrooms. We upsized the return, added a zone damper, and recharged the R-410A; the next 105°F day it held 74°F throughout. That’s the difference between a parts-swapper and a technician who reads the whole system.
Typical AC repair in Burbank: $150–$650. Capacitor replacements usually fall at the lower end; compressor repairs trend higher.
AC Installation
Because Burbank sits in the eastern San Fernando Valley basin, cut off from the coastal marine layer, summer highs routinely exceed 100°F, forcing AC systems to work 15–20°F harder than units just 10 miles west. This demands aggressive sizing and ductwork upgrades that generic load calculations miss. We’ve seen too many 3-ton units fail on peak days while properly sized 4-ton systems hold steady. Our installations include Manual J load calculations calibrated for Burbank’s actual temperature extremes, not Santa Monica’s.
AC installation in Burbank: $3,500–$7,500, depending on system size, ductwork condition, and whether BWP rebate filing is included.
AC Replacement
Replacement is where Burbank’s housing stock gets complicated. The 1940s–1960s ranch homes and California bungalows concentrated around Magnolia Park and south of Alameda Avenue were built with minimal wall and attic insulation. Many retain original or early-retrofit ductwork severely undersized for peak cooling loads. Swapping a dead unit without addressing duct capacity guarantees short cycling, hot bedrooms, and premature compressor failure. We’ll tell you honestly when your ducts need upsizing versus when a straight replacement makes sense.
Refrigerant Recharge
Low refrigerant in Burbank usually means a leak, not normal consumption. We locate and repair leaks before recharging R-410A or R-32 systems. Recharging alone without fixing the leak is throwing money at a recurring problem, and we’re not interested in callbacks.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We maintain factory-trained compatibility across nine major brands, and we stock parts locally for the four most common in Burbank: Trane, Lennox, Goodman, and Rheem. Whether your Magnolia Park bungalow still runs a 1998 Rheem or your Studio District condo has a 2022 Lennox mini split, we carry the capacitors, contactors, and control boards to avoid supply-chain delays. No “we don’t work on that” here.
Common AC Repair & Installation Problems We See in Burbank Homes
- Contractors applying coastal LA sizing to Burbank homes. A 3-ton unit spec’d for a similarly sized home in Santa Monica will fail on Burbank’s 105°F days. We size for actual peak load, not average conditions.
- BWP rebate paperwork skipped at install. Contractors unfamiliar with Burbank process jobs through state or federal channels and miss BWP incentives entirely. That mistake frequently triggers a second inspection cycle when caught post-installation.
- Original 1950s ductwork in Magnolia Park bungalows too small for modern AC. Replacing the unit without duct redesign leads to short cycling, hot and cold spots, and compressor strain that kills the new system early.
- Santa Ana events causing freeze-ups in fall. Dry 85–95°F surges arrive when systems have been switched to heating mode. Coils freeze because the refrigerant charge and airflow aren’t calibrated for this second stress cycle.
Pricing for AC Repair & Installation in Burbank, CA
| Service | Typical Range in Burbank |
|---|---|
| AC Repair | $150–$650 |
| AC Installation | $3,500–$7,500 |
| Furnace Repair | $175–$825 |
| AC Tune-Up | $95–$235 |
What moves you within these ranges? System age, accessibility (crawl space versus garage), whether duct modification is needed, and refrigerant type. We provide upfront pricing before any work begins, and estimates are free. Call (844) 560-6978 to schedule.
We Also Serve Cities Near Burbank
Our service radius covers Universal City, North Hollywood, Glendale, and Studio City. Each has its own utility quirks and climate considerations, but Burbank’s BWP-specific workflow and valley heat exposure make it unique. If you’re on the border between Burbank and Glendale, we’ll confirm which permit pathway applies before we start.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — AC Repair & Installation in Burbank
You need Burbank Water and Power (BWP) permits, not LADWP. BWP maintains its own inspection queue, rebate portal, and approval timeline separate from every surrounding utility. Contractors who file through LADWP or SCE leave your project in limbo and your rebates unclaimed. We handle BWP filing as standard on every Burbank installation. Call (844) 560-6978 and we’ll walk you through the current timeline.
Original floor registers aren’t automatically a problem, but the ductwork behind them usually is. Those 1940s supply lines were sized for heating-only systems in a cooler valley, and they can’t move enough CFM for modern cooling loads. We assess static pressure and airflow room-by-room before recommending any unit. Sometimes the registers stay and we upsize the trunk; sometimes a duct redesign is unavoidable. The inspection is free.
A major repair on a 15-year-old Carrier in Burbank typically runs $400–$650, while replacement with a properly sized new system ranges $3,500–$7,500. At 15 years, you’re past the midpoint of expected lifespan, and Burbank’s heat load means that unit has accumulated more runtime hours than the same age unit in a milder climate. We don’t push replacement unnecessarily, but we also won’t pretend a compressor replacement on a 17-year-old system is a permanent fix. Call for an honest assessment.
Fall Santa Ana events in Burbank bring dry 85–95°F surges precisely when your system has been switched to heating mode or lower cooling demand. The refrigerant charge and airflow settings that worked for humid summer conditions aren’t calibrated for this rapid, dry heat spike. Low airflow from dirty filters or slightly low charge — tolerable in July — hits a tipping point. We check charge levels and airflow seasonally to prevent this. If it’s happening now, shut the system off and call (844) 560-6978 before the coil damage worsens.
No, capacitor replacement does not require a BWP inspection. It’s a same-day repair we complete without permitting delays. We do recommend it be performed by a trained technician — capacitors store lethal voltage even with power disconnected. Don’t attempt this yourself. Call (844) 560-6978; estimates are free.
Ready to get your Burbank home or business cooling properly? Call Crestview Heating & Air California at (844) 560-6978 for a free estimate. We’ll assess your system, check your ductwork, and give you upfront pricing with no pressure. From emergency calls to full replacements, we’ve handled Burbank’s heat for nearly two decades.
Written by Marcus Feldman, Owner and Service Manager at Crestview Heating & Air California, serving Burbank and the San Fernando Valley with 19 years of hands-on HVAC experience.