Fast, Reliable Heating & Furnace Across San Ramon
Heating and furnace repair in San Ramon typically costs $150–$700 for most repairs, with furnace tune-ups running $80–$200, and our Heating & Furnace team can usually diagnose your system same-day. We’re familiar with the specific furnace failure patterns that hit San Ramon’s planned communities, from Dougherty Valley to Twin Creeks, where thousands of builder-grade systems installed during the 2000s buildout are now reaching critical age. If your furnace is blowing cold air, cycling constantly, or your heat exchanger has failed, call us at (844) 560-6978 for a free estimate.
Why Crestview Heating & Air California Is San Ramon’s Preferred Heating & Furnace Company
We’ve been serving San Ramon homeowners for nearly two decades, and our 4.8-star average across 250+ customer reviews reflects the kind of repeat business that only comes from showing up when promised and fixing it right. Owner Marcus Feldman still manages jobs in the field as Service Manager, so the accountability you expect from ownership is present on every San Ramon call, not buried behind a dispatch center.
Our response time to San Ramon is typically same-day or next-day because we’re routing from our established Bay Area base, not scrambling to cover territory we don’t know. That matters when your furnace quits on a 35°F January morning and your Dougherty Valley home’s single-pane builder windows are doing nothing to hold heat.
We know San Ramon’s housing stock intimately. The two-story production homes built during the 1990s and 2000s planned-community boom, especially dense in ZIP codes 94582 and 94583, share common ductwork and furnace configurations that create predictable, fixable problems. We’ve replaced furnaces on the same San Ramon cul-de-sac three times in one summer because neighbors talk, compare utility bills, and realize their identical builder-grade systems are failing in identical ways.
Our Heating & Furnace Services in San Ramon
Furnace Repair
Most furnace repairs in San Ramon fall between $150–$700, depending on whether we’re replacing a failed ignitor, fixing a gas valve, or addressing a limit switch that’s been tripping due to restricted airflow. In San Ramon’s inland climate, furnaces work hard through cold valley-floor mornings from November through March, then sit idle while summer heat soars past 100°F. That seasonal stress pattern causes expansion-contraction fatigue in heat exchangers and ignitor assemblies. We carry parts for Carrier, Trane, Lennox, Goodman, and Rheem systems on our trucks, so most San Ramon repairs finish in one visit.
Furnace Replacement
Furnace replacement is our most called-in service from Dougherty Valley and Twin Creeks, and for good reason. Those 2000s tract homes were built with builder-grade 80% AFUE furnaces that typically last 15–20 years, meaning they’re failing now in clusters. We replaced a 20-year-old builder-grade gas furnace in a Dougherty Valley two-story home where the attic air handler was cooking in 130°F summer heat, causing the heat exchanger to crack. Our crew upgraded to a two-stage Carrier unit with proper attic insulation wrap, solving both the chronic upstairs cold spots and the safety risk. For San Ramon replacement jobs, we size carefully for your actual ductwork, not just the original builder spec, because many of these homes were built with undersized runs to upstairs bedrooms.
Furnace Tune-Up
A furnace tune-up in San Ramon runs $80–$200 and pays for itself in efficiency gains alone, especially on aging systems fighting against poor attic placement and leaky ductwork. Our tune-up includes combustion analysis, heat exchanger inspection for cracks, gas pressure verification, and airflow measurement at each register. In San Ramon’s planned communities, we frequently find furnaces that were never properly commissioned during original construction, running 15–20% below rated efficiency for years. Annual tune-ups catch heat exchanger cracks before they become carbon monoxide risks, and they keep your warranty valid on newer equipment.
Heat Exchanger Repair & Replacement
Heat exchanger failure is the repair that separates a fixable furnace from a replacement in most San Ramon homes. The combination of San Ramon’s extreme attic heat in summer and cold-weather winter cycling causes accelerated metal fatigue in builder-grade heat exchangers, particularly in 1990s–2000s Goodman and Rheem units we see throughout 94582 and 94583. A cracked heat exchanger is a genuine safety hazard, circulating combustion gases into your living space. We don’t patch these. We’ll show you the crack with a borescope camera, explain your options clearly, and if replacement makes more sense, we’ll quote a new furnace with no pressure to decide immediately.
Ignitor Replacement & Gas Valve Repair
Ignitor failures spike in San Ramon during summer when power surges from planned-community grid overloads, driven by simultaneous AC startup across hundreds of identical homes, fry hot surface ignitors that were already thermally stressed. Gas valve problems are less common but more urgent, we treat them as same-day calls because a valve that’s stuck open or failing to prove flame is a safety issue we won’t let sit overnight.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Ramon
Your system, our specialty. We service and stock parts for nine major HVAC brands, including Trane, Lennox, Goodman, and Rheem, which covers the vast majority of furnaces installed in San Ramon’s planned communities during the 1990s and 2000s buildouts. Because we know which specific models were spec’d by San Ramon builders, we often have the ignitor, gas valve, or control board on the truck before we arrive. That means faster turnaround for you, and less time with a cold house while parts ship from a warehouse across the state.
Common Heating & Furnace Problems We See in San Ramon Homes
- Builder-grade heat exchangers cracking after 15–20 years in Dougherty Valley’s extreme attic heat. San Ramon’s inland location means attics regularly hit 130°F+ in summer, baking furnace heat exchangers that were only marginally built to spec. We’ve replaced cracked exchangers in homes barely 18 years old, well short of the 20–25 year lifespan homeowners expect.
- Undersized duct runs to upstairs bedrooms causing uneven heating and frequent limit switch trips. The two-story production homes in Twin Creeks and Dougherty Valley were built with ductwork sized for the cheapest possible furnace, not for actual comfort. Upstairs rooms run 8–12°F colder in winter, and the furnace overheats trying to compensate, tripping safety limits.
- Ignitor failures due to power surges common in planned-community grids during summer AC spikes. When every home on your San Ramon cul-de-sac starts a 4-ton AC compressor simultaneously on a 105°F afternoon, voltage drops and spikes follow. Hot surface ignitors are fragile under normal conditions; they’re casualties of this grid stress pattern.
- Attic-mounted air handlers sitting in superheated spaces with inadequate insulation wrap. Original builder installations in 94582 and 94583 often skipped proper attic insulation around furnace cabinets, meaning your system loses heat to the attic in winter and gains destructive heat in summer. We address this during replacement with proper wrap and sometimes duct sealing.
Pricing for Heating & Furnace in San Ramon, CA
We’re upfront about what heating and furnace work costs in San Ramon because we know you’ve already dealt with enough surprises from your aging system.
| Service | Typical Range in San Ramon |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
| Furnace Replacement (installed) | $3,800 – $7,500 |
| Heat Exchanger Replacement | $1,200 – $2,400 |
| Ignitor Replacement | $180 – $350 |
| Gas Valve Repair/Replacement | $250 – $600 |
What moves you within these ranges? The furnace brand and model age, whether ductwork modifications are needed, and accessibility, attic-mounted systems in San Ramon’s tight truss spaces take longer. We don’t quote over the phone for replacement without seeing your setup, but our in-home estimates are free, detailed, and valid for 30 days. Call (844) 560-6978 to schedule.
We Also Serve Cities Near San Ramon
Our service radius covers the full I-680 corridor, including Dublin, Danville, Moraga, and Blackhawk. Each shares San Ramon’s inland climate challenges but has its own housing stock quirks, from Danville’s older ranch homes to Dublin’s newer transit-oriented developments. The same owner-managed service model applies wherever we go.
Serving San Ramon, CA — Our Local Coverage Area
We’re based in the San Ramon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in San Ramon
Yes, if your furnace is original to a 2005 Dougherty Valley build, you’re in the replacement window and proactive replacement lets you choose timing instead of reacting to a midwinter failure. We’ve replaced furnaces on entire San Ramon cul-de-sacs where identical 2005 builder-grade units failed within the same season, and homeowners who planned ahead avoided emergency rates and had time to compare efficiency options. Call (844) 560-6978 for a free assessment of your remaining system life.
Your 2008 Twin Creeks home almost certainly has undersized duct runs to the second floor, a cost-cutting measure common in that build era that creates chronic temperature imbalance. The furnace overheats trying to push enough air upstairs, which trips safety limits and shortens component life. We’ve solved this in dozens of San Ramon two-stories by adding a zoning damper or upsizing critical duct runs during furnace replacement, not just swapping the box.
Yes, we install and configure smart thermostats with every new furnace we put in San Ramon homes, including Wi-Fi models that let you monitor and adjust from your phone. For Dougherty Valley and Twin Creeks homeowners dealing with those upstairs cold spots, a smart thermostat with remote sensors can at least balance comfort by prioritizing temperature where you actually sleep. We’ll walk you through the setup before we leave.
Yes, we service both Lennox and Goodman furnaces, and we carry common parts for both brands on our San Ramon service trucks. Goodman units were widely spec’d by San Ramon tract home builders in the 2000s, so we’ve diagnosed and repaired hundreds in this exact market. Lennox appears more in mid-range builds and later upgrades. Either way, “we don’t work on that brand” isn’t something you’ll hear from us.
Yes, annual tune-ups are especially necessary in San Ramon because your furnace faces unique stress from extreme attic heat in summer and hard winter cycling, plus many original installations were poorly commissioned. Our tune-up catches heat exchanger cracks before they become safety hazards, verifies gas combustion is complete and clean, and restores efficiency that’s been lost to dust and thermal cycling. For the $80–$200 a tune-up costs, the efficiency recovery and failure prevention typically pay back within the heating season. Schedule yours at (844) 560-6978.
Written by Marcus Feldman, Owner and Service Manager at Crestview Heating & Air California, serving San Ramon and the Bay Area since 2006.