Fast, Reliable Heating & Furnace Across Stanton
Heating and furnace repair in Stanton typically costs $150–$700 for repairs and $3,500–$7,500 for full replacement, with most service calls completed same day. Our Heating & Furnace team covers all of Stanton’s 90680 ZIP code, from the mobile home parks along Katella Avenue to the post-war tract homes near Beach Boulevard. We’re familiar with the salt-laden coastal air that accelerates corrosion on furnace components here, and we stock MH-rated equipment and replacement parts that many contractors serving Stanton simply don’t carry.
Call (844) 560-6978 for a free estimate. Whether you’re dealing with a failed heat exchanger in a manufactured home off Cerritos Avenue or an aging Lennox system in a 1950s ranch near Western Avenue, we’ll diagnose it honestly and fix it right.
Why Crestview Heating & Air California Is Stanton’s Preferred Heating & Furnace Company
We’ve built our reputation in Orange County over nearly two decades by showing up personally and solving problems that other technicians miss. Owner Marcus Feldman still manages every job as Service Manager, so the accountability you’re promised is the accountability you get.
Our 4.8-star average across 250+ customer reviews reflects consistent real-world performance, not a handful of curated testimonials. Stanton customers specifically mention our familiarity with mobile home HVAC systems, something franchise dispatchers often lack.
We keep MH-rated furnaces, compact duct-board, and corrosion-resistant hardware on our trucks because Stanton’s housing stock demands it. That preparation means fewer return trips and faster repairs for you.
From emergency calls to commercial buildouts, we handle the full range. But in Stanton, our bread and butter is manufactured housing furnace work, and we’ve invested in the inventory and training to prove it.
Our Heating & Furnace Services in Stanton
Furnace Repair
Furnace repair in Stanton runs $150–$700 depending on the component and system type. We see a lot of corroded burners and failed ignitors in mobile home parks near the 22 Freeway, where salt air works faster on metal. Our trucks carry replacement parts for Goodman, Rheem, and Lennox systems common in Stanton’s manufactured housing, plus universal ignitors and gas valves for older units. If your pilot keeps going out or your burner won’t ignite, we’ll trace the root cause instead of swapping parts blindly.
Furnace Replacement
Full furnace replacement in Stanton costs $3,500–$7,500 installed, with MH-rated units typically at the lower end of that range due to smaller cabinet sizes. In a mobile home park off Katella Avenue, we found a 20-year-old MH-rated furnace with a rusted heat exchanger from salt-laden air. We replaced it with a new Goodman MH-rated unit, upgrading the duct-board to sealed metal for better airflow. That job took one day. We handle permitting and disposal, and we size every replacement to the actual heat load, not the old unit’s badge.
Furnace Tune-Up
A furnace tune-up in Stanton runs $80–$200 and should happen annually before the first cold snap. We inspect heat exchangers for corrosion cracks, test gas pressure, clean burners, and check duct-board integrity in manufactured homes. Stanton’s mild winters mean furnaces sit idle for months, then get asked to perform immediately. That cycling pattern stresses components. Our tune-ups catch the wear before it becomes a no-heat call on a January morning.
Heat Exchanger Repair & Replacement
Heat exchanger failure is serious. A cracked exchanger can leak carbon monoxide into your home, and in Stanton’s tightly sealed mobile homes, that risk concentrates fast. We use combustion analyzers and visual inspection cameras to verify exchanger integrity. Replacement heat exchangers run $800–$2,400 depending on furnace age and brand availability. For units over 15 years old, we typically recommend full replacement, especially if the original was an MH-rated model with limited parts availability.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stanton
Your system, our specialty. We service and install nine major HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. In Stanton, we see Goodman and Rheem most frequently in manufactured housing, with Lennox and Trane common in the city’s 1950s–60s tract homes. We stock local parts for fast turnaround, and our factory training means we won’t tell you “we don’t work on that.” Whether it’s a 30-year-old wall heater in a mobile home off Magnolia Street or a newer variable-speed Trane in a renovated ranch near Chapman Avenue, we’ve got the manuals and the parts.
Common Heating & Furnace Problems We See in Stanton Homes
- Coastal salt air corrosion: Stanton sits 12 miles inland but still catches marine-layer moisture mixed with salt, especially in mobile home parks with less wind protection. We’ve replaced furnace burners and heat exchangers in manufactured homes that failed within 5–7 years, half the expected lifespan, due to accelerated corrosion.
- Deteriorated duct-board: The compact duct-board runs in Stanton’s manufactured homes were never designed for decades of use. We find disintegrated sections leaking heated air into crawl spaces, forcing furnaces to overwork and driving up gas bills. Sealed metal upgrades solve this permanently.
- Pilot light failure during Santa Ana winds: Older mobile home furnaces with standing pilots frequently extinguish when dry Santa Ana winds blow through Stanton’s flat terrain. The fix ranges from draft hood adjustment to pilot assembly replacement, or upgrading to electronic ignition.
- Undersized ductwork in converted cooling systems: Many Stanton tract homes were built for evaporative cooling with ductwork too small for forced-air heating. We see furnaces cycling on limit switches, overheating, and cracking heat exchangers from restricted airflow.
Pricing for Heating & Furnace in Stanton, CA
We’re upfront about numbers because nobody likes sticker shock after the work’s done.
| Service | Price Range in Stanton |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Replacement | $3,500 – $7,500 |
| Furnace Tune-Up | $80 – $200 |
| Heat Exchanger Replacement | $800 – $2,400 |
| Gas Valve Repair/Replacement | $250 – $650 |
| Ignitor Replacement | $150 – $400 |
What moves the needle on cost? Brand and age of your furnace, whether it’s a standard or MH-rated unit, accessibility in mobile home closets or attics, and whether duct-board needs replacement alongside the furnace. MH-rated parts sometimes cost more due to limited suppliers, but we source through specialized channels to keep pricing reasonable.
Every estimate is free. Call (844) 560-6978 and we’ll give you an exact number after seeing your system.
We Also Serve Cities Near Stanton
Our service radius covers Garden Grove to the north, Cypress to the west, Westminster to the south, and Midway City to the southwest. Each city has different housing stock and HVAC needs, but Stanton’s concentration of manufactured housing remains unique in the area. If you’re on the border between Stanton and one of these neighboring cities, we’ll confirm coverage when you call.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Heating & Furnace in Stanton
Yes. California and federal HUD standards require mobile home furnaces to be specifically rated for manufactured housing, with sealed combustion and compact cabinets designed for smaller spaces. Standard residential furnaces won’t fit the closets, won’t vent properly through mobile home roof jacks, and may violate your park’s insurance requirements. We stock Goodman and Rheem MH-rated units and handle the specific installation codes that apply to Stanton’s manufactured communities. Call (844) 560-6978 to check your current unit’s rating.
Santa Ana winds and draft conditions in Stanton’s flat, exposed mobile home parks are the usual culprits. Older standing-pilot furnaces have minimal protection against sudden pressure changes. We inspect the draft hood, thermocouple, and pilot assembly for proper positioning and wear. Sometimes the fix is adjustment. Sometimes it’s upgrading to electronic ignition, which eliminates the pilot entirely. We’ll tell you which makes sense for your furnace’s age and condition.
Annually, ideally in October before heating season begins. Stanton’s salt air and long idle periods between heating seasons make this especially important. Corrosion starts during the humid months when the furnace isn’t running. Our tune-up includes heat exchanger inspection, burner cleaning, gas pressure test, and duct-board check in manufactured homes. The $80–$200 cost prevents the $3,500+ emergency replacement that neglected corrosion often leads to.
Yes, and we often recommend it alongside furnace replacement. Original duct-board in Stanton’s manufactured homes has typically degraded after 15–25 years, leaking heated air and creating pressure imbalances. We upgrade to sealed metal ductwork where accessible, improving airflow and reducing furnace strain. This work adds $800–$2,000 to a replacement job but pays back in efficiency and longevity. We’ll inspect your current duct-board during any service call and show you what we find.
We install Goodman and Rheem MH-rated furnaces most often in Stanton, with Lennox available for specific applications. These three brands have the strongest parts availability and warranty support for manufactured housing in Orange County. Our factory training covers all three, and we stock common replacement components for faster future service. We’ll match the brand to your existing duct configuration and heating load, not push whatever’s on the truck. Call (844) 560-6978 for a free sizing estimate.
Ready to get your Stanton home heating right? Call Crestview Heating & Air California at (844) 560-6978 for a free estimate. Owner Marcus Feldman manages every job personally, and we’ll give you honest answers about whether repair or replacement makes sense for your specific furnace, manufactured home or otherwise.
Written by Marcus Feldman, Owner at Crestview Heating & Air California, serving Stanton and Orange County since 2005.